Hot Air Balloon Mobile

I have a wonderful friend who is expecting and while visiting her she showed me these beautiful glass balloons she had purchased for her baby's room. It gave me a wonderful idea, to make her a handmade gift that would incorporate her balloon theme. I had seen some balloon mobiles on Etsy and Pinterest and thought to myself that  I could make one.

Here's what you'll need to make one:

1. Felt in different colors (I ended up using about 1/4-1/2 yard of each color)
2. Embroidery thread ( I used white and brown)
3. Embroidery ring
4. A book ring
5. Glue gun and glue sticks
6. Balloon pattern
7. Pen
8. Scissors
9. Cotton filler
10. Embroidery needle
11. White acrylic glue
12. Paintbrush

The first step in making the mobile was to find a balloon pattern online, I just performed a Google Search and printed the balloon I liked the most. Once that was done, I cut out the pattern and traced it on the felt. Each balloon had 4 sides, I needed a total of 24 balloon cutouts, but you can modify to who many balloons you'll need.

Once the patterns were traced and cut, my next step was to work on the balloon baskets. For the baskets, I ended up cutting strips of brown felt and creating a weaved pattern of 4 strips height-wise and 12 small strips lengthwise. Each strip was about 1/2 inch. Once I had the weave completed, I glued everything down. I was able to fold the weave in half, (height-wise) and end with a 2 x 12 strip. I then started cutting my assembly down to 2 x 2 pieces and gluing approximately 3 inches of brown embroidery thread on each side. Below is a picture of the finished product.

For the balloons themselves I started by gluing two sides together as shown below.

That was followed by adding glue to the second side of the balloon and placing one of the strings of the embroidery thread on the glue (picture below).

I repeated both of the previous gluing steps and this is the finished product.

All the clouds I cut freehand, I made sure to fold my felt in half so each time I made a cloud I ended with two identical copies. If cutting the clouds freehand seems a little too daunting of a task, you can always search online for a cloud pattern or template and use that as a guide.

Instead of gluing the clouds together as I did for the balloons, I used the embroidery thread and needle to stitch them together. Before going all the way around on the stitching, I used cotton filler to fill the clouds and give them a 3D effect.

The embroidery ring was a plain wood once, I ended buying an 8 inch but looking back I could have used a smaller one. Since I didn't want the wood to show I painted the ring white using some acrylic paint and a paintbrush.

Once the ring was dried assembly time came. I used the glue to place clouds all around the outside loop of the embroidery ring, making it seem like the balloons were reaching the sky.

Using my white embroidery thread and needle, I "sowed" a knot on the top of each balloon and added different lengths of thread in order to create my balloon heights. I I also added some thread to plain clouds to help me fill any gaps between balloons.

To complete the assembly, I tied 5 long strings of embroidery thread to the inner loop of the embroidery ring. 

I had all the strings tied to a book ring that can be used to mount the finished product.

I also tied the balloons and clouds that were connected to embroidery thread to that inner ring before placing the outer ring and tightening. That way no thread knots can be seen from the outside and it keeps the mobile able to be adjusted without affecting the outer look.

Here's another picture of the finished product: